KNX-Modbus Converter Box
Part Number: Order Ref: LT-CON-CON02100KN-DIN01V1
Order Ref: LT-CON-CON02200KN-DIN01V1
Category: Converter
- Modbus Type: RTU (RS-485), Master
- No. of Slaves supported: 4
- Byte order for data encoding
- KNX Data points: 100/200
- Compact Enclosure
📐Technical Specification
+Accesories
📥Document
📹Videos
📚Application Note
| Parameter | Description |
|---|---|
| No. of Slaves supported | 4 |
| No. of KNX Data points supported | 50 |
| Connection Type : RS 485 | Screw Connection with tension sleeve |
| Maximum Cable Length | 50 |
| Voltage | 30VDC SELV, KNX |
| Maximum Current Consumption | 15mA |
| Maximum Current Consumption | 15mA |
| Connection Type: KNX | Typical TP1 bus connector for 0.80mm Ø rigid cable |
| External Power Supply | Not required |
| Operational Temperature | 0°C .. +55°C |
| Storage Temperature | -20°C .. +55°C |
| Operation Humidity | 5 .. 95% (Non-condensing) |
| Storage Humidity | 5 .. 95% (Non-condensing) |
| Operation Humidity | 5 .. 95% (Non-condensing) |
| Degree of Protection | IP20, clean environment |
| Installation | Flush mount |
| Housing Material | ABS (Non-condensing) |
| Enclosure dimension (l x w x h) | 44 x 44 x 16 mm |
IR Receiver/Transmitter
📁 TECHNICAL DOCUMENTS
💿 APPLICATION PROGRAM ETS
- NXIR ETS
- NXIR Configurator
📚 APPLICATION NOTES
Application |
Description |
|---|---|
| Application Note | Description of Application |